Discussion Locked

Win98 boot from boot disk

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
changed CMOS to boot from A & D; starts up to password (none required);press ESC and computer hangs on the clouds wallpaper; Explorer seems to be missing. I deleted all refs to McAfee, Iomega from registry and uninstalled both; now I get nothing. I just want to get my data files off and trash the computer! have been futzing around w/ various error msgs since December trying to resolve. It is a 233 4 gb, 128 RAM, 4 yrs old. time to move on but want to get data files if possible.

9 replies

by stef gerber

Save yourself a lot of trouble! get a spare hard drive and slap it in as a slave. Then boot to DOS and copy your data files to the other drive. Re-do the other machine & copy your data back.This is surely the fastest and easiest way to do it. You can also try to Laplink your datafiles accross.

Cheers

by davemurgatroyd

Use your boot disk to boot into "DOS - Command Mode" and either copy of to floppy disks:-
OR if you have a spare hard disk install that first as a slave (making sure your BIOS recognises it on start up, you should hit DEL or F2 or whatever your first bootup screen tells you to press to enter BIOS set-up and then get PC to "autodetect HDD" then "save" these settings and exit [which keys to press should be shown on screen] then use bootup disk to boot into "DOS command mode" if you "DIR d:" and get an error message you need to fdisk d: and format it(If you need help on this e-mail me)

You can then copy your files across from c: to d:

by danpiers

I do this for customers all the time. The very simplest thing to do is get your new system first and install your old harddisk as a second drive on the new system. Copy the data you want, then format the old drive. Put it back in your old system,install a fresh copy of Windows, then sell that baby. Good luck.

by sgotero

Start a machine in Safe Mode, and then satrt regedit, make a backup of this doing save in a file in C:\, once do it, star in DOS mode, and execute the next: c:\regedit /c it will recover your registry and will start again you PC. Note that it may be very slow process.
Hope it?s help you

This discussion is closed to new replies.