Discussion Locked

Win98 client access to 2 different PDCs

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can WIN98 Client have drives mapped to shares on 2 different Primary NT Domains?

8 replies

by some guy in seattle

Provided the trusts have been set up properly (the intended domain must trust the domain the client is in) and the share permissions are correct. Remember that if the client user has an account in each domain then the share permission needs to havethe domain/user set in the permissions.

Hope that helps,

by mphoffar

One is right in that, if the trusts are there, then you should be able to do that.

However, if a trust isn't there, you should be able to create an account on the other domain (the one they don't authenticate on) and then map the drives with a net use command with something like the following

net use \\pdcname\sharename /user:\username

where
is the password on the other system
is the domain of the other PDC
username is account on theother computer.

Good luck to you

Mark

by tmaclennan

Win 9x clients can only use a single username/password combination on the client. This means that they can't connect using a second username or a different password to a different Domain like you could with WinNT or Win2000. Having said this, we do this sort of thing all the time. What it requires is that the user have the exact same userids on both PDCs, and synchronize their passwords manually (using net password \\domain). Once this is done, the user need only map the share, without a useridor password.

by jmusil

What actually corrected the problem was to have an lmhosts file in the C:\windows directory that looked like this:

ip address of domain server(tab) SERVER NAME (tab) #PRE (tab) #DOM:domain name

for both domains. After that it worked great.

This discussion is closed to new replies.