Discussion Locked

Win98 Client printing 11x17 using PCL HP

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to print on an HP5si using a PCL driver. The network is NT 4.0. The user is on a Win98 Workstation and PageMaker 6.5.

I've installed the 5si on the NT 4.0 Server using the latest install/driver from HP (PCL6?). I set the default document to pull from tray 3 - 11x17.

When I install that printer on the Win98 Workstation and print a PageMaker document the document is printed way off center.

User said that it used to work with a different driver that had more tabs than what comes up on the properties of this one. A collegue of mine suggested I install the print driver that comes on the PageMaker CD. I have to drive 2 hours to get to this client and I need detailed instructions that will really work this time.

What print driver should I be using on the server?
What driver should be installed on the workstation and how should I install it?

8 replies

by shmaltz

Post Script is the one with the tabs. You should be able to download it from the web site of the company who mfg the printer.

by marty

The HP5si PS driver requires PS memory add-on module which this printer does not have. I know it should work - because it did once before - however the print queue got corrupt and had to be re-created. Help!!!

by wanabedrsean

What printer driver was installed and what was the default printer set to when the document was created the reason I ask this is alot of publishing software paginates the document for the installed default printerThe driver makes sure the document prints but there are differences in margin and top of form usually when I see this happen it is with hp printers if the 5si is not set to the default printer set it to the default printerand reopen pagemaker and the document then try printing. if thisdosent work keep the 5si as the default printer and recreate the document or create a new document then measure the items/objects on the document and see if it is correct if it is correct this is likly to be the problem

This discussion is closed to new replies.