Discussion Locked

Win98 Direct Connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What is the best method to directly connect 2 Win98 Boxes? I know that the Direct Connection Wizard will allow either a parallel or serial using a special cable but is USB an option?

5 replies

by fizzoid

It really depends on what your going to be doing, how much information your going to be transfering etc. For small file transfers on a limited basis you could use a parallel cable using the direct connection as you suggest. It's faster then a serialcable. Approx. 6mb/min as opposed to 1mb/min. However I have had problems getting the machines to connect.If you are going to transfer large files regularly and you have the cash, go for 2 100mb ethernet cards an a RJ45 crossover cable. It's not tooexpensive. About $20 for a card and $5 for the cable (depending on length) Install TCP/IP and NETBEUI protocols and connect that way. Assign the machines the same class of IP address in the same range and away you go. If you need anymore info on this, just let me know. You can buy USB network hubs, but this is a little more costly and not as fast as a 100mb network. As I say, if oyu want more detailed info, let me know :-)

by braveh4rt

It depends on your purpose. do the speed important for you. if yuo do you can use ethernet card and crosswire utp. if no you can use direct cable connection or use laplink and a pararel port.
i use the laplink with pararel port to transfer win98 file in 25 min transfer time with 198 Mb

This discussion is closed to new replies.