Discussion Locked

Win98 errors on startup

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
During a recent install of a replacement hard drive to a pentium machine, opon rebooting the system for "starting windows 98 for the first time" a power failure occured due to lightening. After the power came back on, the system came up but with errors. The system is looking for 2 files, dfs.vxd and msdn32.dll. Where do I find these files, and what directory do they go in?

11 replies

by daniel.lawson

I followed the link and followed the instructions. This helped with the vxd file, but not the dll file

Thanks

by dmiles

This problem can occur by Dial-Up Networking or Dial-Up Adapter
Use following to fix
1)Start
2)Run
3)type sfc
4)click OK
click on Extract one file from installation disk
5)type dfs.vxd
6)click Start button
7)type D:WIN98 (type the cd-rom drive letter)
8)Click OK
9)Repeat steps #1-8 and type msdn32.dll
If the above solution does not work,open the Control Panel,double-click the Add/Remove Programs icon
Select the Windows Setup tab,then click Communications
Click Details and then click the Dial-Up networking box to clear the box,now close and reboot computer
Now repeat the above process and reinsert the check at Dial-Up Networking and close,reboot computer.

by daniel.lawson

This helped to restore the DLL file but not the vxd file. But I followed the instructions from reply number one and combined they resolved my problem

Thank you

by avswamy

Run files which ur seeking and extract from setup disk and copy to c:\windows\system
directory. Importantly
after copying vxd extention files there shouldn't be much problem but with dll files it should be registered in registry this can be done like this way

type this command in run regsvr32 (file location eg: c:\windows\system\xyz.dll)

by anupk

Go to run, and type sysedit. In the autoexec.bat and config.sys , take out the files its looking for. Then it should bootup fine.

This discussion is closed to new replies.