9 replies
by zamski
Did you do a clean install (format the drive and then install) or are you just reinstalling it over the existing data?
Can you boot to DOS? This might not be too helpful, but when you say you pulled out everything, there is obviously one thing you did not pull out. The hard drive. I had an experience with an old Quantum drive where I needed to install a patch first in order to get Win 98 to install properly. However it would boot up to DOS fine. You might want to check if that particulardrive has any install issues with Win 98.
by finnie
by espet
by finnie
by kgosnell
Sounds like a boot nasty (Virus/worm) , but as you did not check the Video card it can also be that, if you look at it logically it is losing memory via something that is not erasing the usage, I would suspect the Active Desktop as the culprit, there are software issues that can cause it to leak terribly, and a third party program has locked out the normal Windows wipe at a certain level, and raised it beyond or nearly beyond the limit of Ram, first things first , set the active desktop back toone of the other options, this should ease up the leak ,and search the boot for something that is loading that you don't need as it is flawed, try first using CTRL+ALT+DEL to view the operating programs and turn off the ones you don't need, hopefulyyou will hit the culprit right away as whatever it is is connected to a Windows program, if this doesn't work go into the Config sys and see what is booting that don't show and unckeck what you don't need or use, be very carefull and only uncheck what you know is foreign, but before you do make a startup disk so if you uncheck the wrong thing accidently , you can recover. Oh if you used a memory manager in the past and simply deleted it without resetting the default settings , guess what , it is still a nasty ghost, and you will have to reinstall it and reset the memory limits to the default settings, like most things , we are our own worst enemies.
Hope the info helps
by finnie
by kgosnell
I thought I had better make sure you understand what this type of Boot virus/worm, if that is what it is, likely it has already spred to your other test machines and you will have to root it out .
Also for this very reason, you must find what is causing the slowdown to be sure, as your customers will go away if you don't find and it spreads. Hopefuly it is a combo Win and software/hardware problem that has been overlooked due to it's strange actions.
I wish you luck on a speedy solution
by finnie
by finnie
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending