Discussion Locked

Win98 Networking problem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have had the problem where I have win98 machines on a dsl hookup not accessing internet access from a DHCP setup. I am using NAT setup. The win98 pc's are set to obtain an IP address automatically.. such as 10.0.0.xx. Some workstations work fine but others do not. Any idea's of settings i'm missing? I am installing tcp/ip and configs seem to be the same as the other pc's currently working. If I specify an IP of 10.0.0.xx the pc's can only see the network but not the Internet.. obviously because if you specify an ip you can't use the dhcp settings.

7 replies

by don christner

You need to specify the default gateway, ie, the IP address of the computer that is connected to the DSL router. Get into network properties, TCP/IP properties to set the gateway.

Don

by curacao_dejavu

check on all pc's if you have setup the gateway and the dns server reach order (found at the tcp ip settings) as the ipadress of the server.

by philthegreat

1) If all the workstations are set up with the same setting; but some work; some don't. It may not be the default gateway problem.
2) What is the difference between the workstations? How many number of workstations are working? (It may be related to the limit of allowed number of computers working in a subnet and the maximum number of computers supported by the routers or connectors or ...)
3) Please give more details on your scenario in order to clarify the problems. Sometimes the network cards or the cable, or router is the sources of the problem. Or even the length or quality of the cable may cause problems too.

This discussion is closed to new replies.