Discussion Locked

win98 Problem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have a win98 machine w/a problem..When I boot-up all appears to be normal it goes through the post, the windows screen appears then the screen goes blank. I t sounds like I could here the drive working but nothing shows up on the screen. I used the startup disk to get to the command line and I could move and see all the contents on the drive. I tried reinstalling windows but it won't even do that the screen keeps going blank at the very beginning of the installation.Any help would be apprciated. Thanks in advance.

7 replies

by bart777

Try this...
Go into safemode and reset the video to a basic vga (640x480) setting. then reboot and see if you canget the screen. If this works your video settings were incorrect in windows. You can then reset them to whatever you need.
Good Luck

by dudad

Can you boot into safe mode? If so, check your display adapter. Maybe change it to generic, try rebooting in regular mode. If it works, download updated driver for video card.

by david.crouch

first test the hardrive to make sure the intergerity is ok.hardboot with win 98 startup disk and get ontrack hardrive diagnostics.
also bad memory chip can cause this make sure the memory is seated firmly in the slot with no bows in the middle or try another chip.also different video card.

This discussion is closed to new replies.