Discussion Locked

win98se how can I put a swap on "D:\"

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

It appears to give that option on the
performance tab -- but It really doesn't.
I've set up a box for dual booting with
linux and gave the windows partition enough
room -- I think, but there is a whole lot
of "thrashing" going on.

20 replies

by joseph moore

Ok, here is how you set the page file on a specific drive in Win98:
Start -> Settings -> Control Pane -> System -> Performace Tab -> Virtual Memory button -> "Let me specify my own virtual memory settings" radial button.
Click the Hard Drive drop down and select your D: drive.
In the Minimum and Maximum buttons, put the min and max virtual memory sizes you want to use. Don't go any lower than your physical RAM for either setting.
Click OK -> Ok -> Yes to reboot.

Hope that helps.

by Member 36395912

If you read the question, you'll
find that I did just that and it
didn't work. It appears to be dis-
abled in my edition of 98se (there
were between 3 & 5 versions of the
second edition bundles).

by Member 36395912

There does seem to be significant
differences between Win98 & Win98se.
The windows 98 adminstration book does
NOT provide the answer to this question.

by d_v ant

Those are the correct steps for setting your swap file regardless of which version of 98 you are using. To verify where your swap file is, search for the file Win386.swp. That is the name of the swap file.

"I've set up a box for dual booting with
linux and gave the windows partition enough
room -- I think, but there is a whole lot
of "thrashing" going on"

-- Thrashing indicates a shortage of physical RAM, not swap file space. If you have 128 MB or less, I recommend upgrading your memory to alleviate swap file usage. Another option is to turn off some of the programs that startup with Windows. The less you have running in the background, the more memory you'll have available.

Hope this helps...

by shanghai sam

If you can tell me how to "link" the
added space on the "D:\" drive so it
will be utilized properly, that will
solve the problem. To think I used
to spend all my time bitching at
Linux! I guess I'm starting to learn
the alternate O.S. -- now all I have
to do is clean up all of the blood
that squirted out my ears.

by mphoffar

Exazcly how much ram do you have, how much space is on D and how big did you set this swap file??

Rahouse is right in saying that this may be just a small amount of physical ram trying to handle too much going on, thus the lot of activity with the swap file and disk drive. Because you said you're also running Linux, also keep in mind, that the way that Linux utilizes a swap space and how windows does it are pretty much night and day, so i hope you're not expecting the same swap space performance you're getting from your linux setup.

Mark

by shanghai sam

You may be right, my windows box is a
faster cpu and ddram. It currently is
a boat anchor. (A new virus doesn't
require an attachment, SELECTING it to
delete it was enough.) I've been
working mostly with the linux to learn
it and much of the "98" has dribbled
out my ears to make room.
But still, there is no activity
on the D:\ drive despite resetting the
swap to the partition I formatted for
dos. (With fdisk.)

by Member 36395912

I do believe 256mgs of ram is sufficient for
windows 98se. During the loading process
the size of the swap file (and the location)
can make a difference. There are a lot of
tweaks I am not aware of. The win98
partition does load properly - but some-
what slower than when it had the drive to
itself. I think I made the partition a
little tight. (Admittedly, I set it up for
utilizing DOS utilities.) For some reason,
MS in their infinite wisdom doesn't seem to
let me locate the swap file on a separate
drive. I have talked to others and they
confirm this. But, I also know there are
"reach arounds" for just about everything.

by d_v ant

Install System Monitor. It will show you what sizeof your swap file is and how much of your swap file is in use. It doesn't show you the location, but that will let you know if you need to increase the size of it. You can also use system monitor to see how your memory is being used. Look in Windows help for system monitor if you aren't sure how to use it.

by d_v ant

Sorry about the double posting. I tried to hit stop to correct an error, but it went thru anyway......

by Member 36395912

I am well aware of system monitor. Win98se disables the ability to select the drive for the swap-file in the
"advanced performance" window.

by d_v ant

Install System Monitor. It will show you what size your swap file is and how much of your swap file is in use. It doesn't show you the location, but that will let you know if you need to increase the size of it. You can also use system monitor to see how your memory is being used. Look in Windows help for system monitor if you aren't sure how to use it.

by d_v ant

Sorry about the double posting. I tried to hit stop to correct an error, but it went thru anyway......

by fenaikh

Hi
Yes you are right use system.ini file to change it.

1- Click Start , click Run , type sysedit , and then enter .
2- Click the System.ini tab, then find the [386Enh] section and locate PagingFile=C:\win386.swp then change it to pagingFile=D:\win386.swp.
if it is not there then
type PagingFile=D:\win386.swp under the [386Enh] section

Good luck

Mohamed

by fenaikh

*************** very important *********
the drive letter should always be specified using an uppercase letter example D:

by Member 36395912

The last answer was perfect although I haven't
tried it yet because; A. I saw someplace (which
I didn't log as I'm an idiot) you can name a
suitably sized partition itself to be the swap-
file. B. I don't know what to do with "D:".
Do I simply create a FILE with the name 386swap?

by housedoc1800s

I run 3 different OS on two hardrives with one IDE cable on slot 1 the other on slot 2 with the cd and burner set as slaves. On start up hold down the delete and enter bios and boot off IDE-0 or IDE-1, to fire up the drive I want to use.
I like Linux to be on it's own drive.

This discussion is closed to new replies.