Discussion Locked

windows 2000

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can i set up a multi profile for a user that wants to use his laptop at home. Is there a way to configure his laptop for home and have it load different protocols and when he's at work load different protocols than the one's at home

11 replies

by quahsays

not sure if this helps, but from office, normally you should be logging on to your network...in Windows 2000, there's this option during Ctrl-Alt-Del that allows you to log on to the workstation only...
so at office, i'll logon to my office Domain and at home, i'll logon to the workstation...

by idtent

just a thought - you might want to try setting up diferent hardware profiles, depends on what you mean by protocols...

by bill_h

(Pursuant to our e-mail discussions...)

If the user wants to connect to one network at work, and a separate network at home, there are two paths you can follow.

The first path is perhaps the path of greatest resistance - require the user to adapt his home network to support the connection settings (IP/DNS/WINS) currently configured for the laptop. (From the corporate perspective this is reasonable - the laptop is company property, and any corporate needs outweigh individual needs, right?)

Another path is to provide multiple connection points for the laptop. If you can install a second network adapter in the laptop, then you could set up multiple hardware profiles. The "Office" profile would enable one adapter and disable the other, and vice versa for the "Home" profile. This would allow you to establish separate IP, DNS, and WINS settings for each adapter. An alternative would be to acquire a docking station for the laptop. The docking station could contain a network adapter for the office (or home) connectivity. Again, multiple hardware profiles could be set up to enable the docking station adapter and disable the laptop adapter (and vice versa, obviously...)

If you choose to go the "multiple connectivity points" route, you might wish to refer to the MSDN article "How to Create Hardware Profiles on Windows 2000-Based Mobile Computers", which is located at:

http://support.microsoft.com/support/kb/articles/Q225/8/10.ASP

(If the URL above does not work, locate and remove any spaces inserted by the TechRepublic system.)

Hope this helps...

by fred_fortson

Gene, it's just such a need that motivated Microsoft to include IntelliMirror with Windows 2000. Learn all about it by clicking on the Start button and HELP.

ff

by robert schommer

I am assuming that he wants to connect to his HAN or Cable/DSL setup at home and requires a completly seperate network setup to facilitate ths.

Simply create seperate "Local Area Connections" for the same hardware device with appropriate settings.

When the user is one the corporate LAN he first disables the HAN Local Area Connection and enables the Corporate LAN Local Area Connection. Relog in and he should be good to go.

This discussion is closed to new replies.