Discussion Locked

Windows 2000 and DHCP

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am installing a W2K server that will be used as a exchange server. This is my first time with W2K. I have DHCP installed. When a client connects, it can see the server and access files etc. The server sees the client in network neighborhood but cannot find a path to look at the client's hard drive. All works fine if I go back to static addresses. Runs the same with or without AD. I need the DHCP working.

9 replies

by spydergst1

If they client is on a different segment from the server you may need to configure wins resoulution. You might try to configure your DNS also just to be safe.

by agibbs

If you're using DHCP to assign IP's to your clients, you MUST have a WINS server. If you don't, you'll notice that if you try to access a client's hard drive by IP address (i.e. \\192.168.100.1\c$\...) it will work, but using the NETBIOS name (i.e.\\computername\c$\...) it won't work. When using DHCP, NETBIOS names will not resolve to IP addresses without a WINS server. Set up WINS, this should fix your problem.

by aekland

It does sound like a name resolution issue. Check wins and DNS. Als check your node type. One question: If it will be an exchange server why does it need access to the clients computer? Exchange will work the same as the file serving does.

by stoop

DHCP has nothing to do with name resolution. If you set your workstation to "Obtain IP Address automagically" then your workstation should get the IP address from the server. this is ALL that DHCP does.

To check to see if the client (win9x) is getting a DHCP address, run "winipcfg" on the client, click "Release all" and click "Renew all" if you get no error message, DHCP is working.

Dave

This discussion is closed to new replies.