Discussion Locked

windows 2000 ide hard drives

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have added a second hard drive to the primary ide .... the drives are correctly sumpered...master and slave...yet 2000 does not see the second drive. why do I need to do?

7 replies

by danfer65

Try This:(Windows 2000 Professional)
Make sure to login as Administrator.
Click on START, SETTINGS, and then CONTROL PANEL.
In the CONTROL PANEL, double-click ADMINISTRATIVE TOOLS. Double-click COMPUTER MANAGEMENT, Click on the + sign on the leftof STORAGE. Once you see the DISK MANAGEMENT, click it once. You should see now, DISK 0 (your original drive), and if the new hard drive was recognized by Win2K(properly installed),you should see DISK 1. If it has a caption "unformatted", right click that and then format, then make it active.

by jesselou

have you let your bios detects your second drive.let it be autodetected by the bios.restart your computer and select recovery console if you have installed it.use fdisk and format your second drive with file system you select for example ntfs at therecovery console prompt type format d: fs:ntfs restart computer.

by ins413

If you the BIOS sees the drive at post and W2K does not see it, you have to go into disk management (Start, Programs, Administrative tools, Computer Management) and check and see if it is there. If not, go to Action Menu on top left hand corner andchoose rescan disks. This should solve your problem. If the disk you are adding contains data, the status will appear as foreign, then you must use the "Import Foreign Disk" command. Hope this helps.

This discussion is closed to new replies.