5 replies
by pikikoko
I had the very same problem as you. I spent a lot of money hiring consultants to work on this issue. I hired 5 MCSE consultants and no one could find a solution. My client called for an end to spending money and said find a quick and dirty solution.So here it goes,and the most interesting thing is that it works. I hook up a win98 client to the network and installed PCanywhere on it. I set the authentication in PCanywhere to do a call back. I logged in a user to the Win98 client that has the rights that where needed by the remote users. My users needed access to an accounting application so timing their access was important. It sounds like this should work if your 80 remote user don't need to remained logged on very long. I tried setting up PCanywhere on the NT server and this didn't work because NT will not release control. I spoke to many Microsoft MCSE Presenters that visited my home town and none could offer a better solution. Save your money and time use PCanywhere on win98 client and enjoy.
Mike
by dan_withrow
by fmiranda
Well eventhough this might be late this could help. Check your users dial-in permission and on the Security option, make sure you are using Windows authentication not RADIUS.
As of today Rocketport 16 is supported by Windows 2000 so this should not be an issue unless you have a faulty driver which you can get from www.rocketport.com
I found the setup of RAS a bit confusing but for internet sharing it work great.
Good luck.
by dan_withrow
by dan_withrow
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending