Discussion Locked

Windows 2000 Remote Access

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is there any way to bring up the domain login window when dialing into an NT network via VPN or Cisco's NAS from a 2000 laptop? These two options connect to the network (allowing intranet and Internet access) but do not bring up the domain login window. When Outlook or a network drive is opened a window appears asking for ID and password. Access is gained in this manner, but the domain login window which appears on a 95/98 machine does not. The domain login is needed in order to run our login scripts.

Any thoughts would be appreciated.

3 replies

by pan 13 x

log in as the user in the domain at startup, the cached password will allow you to log in even though you are not connected to the domain. If you want to prompt for user name and password with the domain , select the dailup adapter you are using , go to properities and click the tab for options, use will see three options there on top. Display progress, prompt for password and include windows login domain. select them all.

by shanghai sam

Thanks for your help, that was it. I was logging in using a local ID. The log-in script still isn't running, but that's another issue.

Thanks again.

This discussion is closed to new replies.