Discussion Locked

Windows 2000 trust to NT 4.0

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I cannot establish a Trusted domain with NT 4.0. 2000 trust tells me the domain cannot be contacted. If I attempt to access the domian via active directory it tells me it is a pre-Windows 2000 domain, so I know it sees it. Any suggestions?

6 replies

by coretek

Can you ping the IP address of the NT domain PDC, if so can you resolve it?s name?

If you cannot access the PDC then the trust will never work, please supply more information.

by fieldstorm

I can ping by name and ip address. I have created an LMHOST file with entries to specify a domain controller. Tracert will return the name of the PDC.

by jmulvey

This smells strongly like a name resolution issue. Even though AD Users & Computers can resolve the server name (and tell you it's pre-Windows 2000)... things are a little different when you are settin up a trust. When you set up a trust to NT4, thefirst thing the Win2000 server is going to do is locate the DCs of NT4 (NOT the server name).

I suspect that these servers are not pointing to the same WINS server, or there is no WINS server. If you can, point them to the same WINS server and try again. If you don't have a WINS server or can't do this... then you'll have to use an LMHOSTS entry on each server to manually tell it where to find a DC for the other domain (so make sure the LMHOSTS file entry has the #PRE #DOM: suffix)....

Good luck,
- Jim
Consultant
Co-Author, "Windows 2000 Essential Reference"

This discussion is closed to new replies.