Windows 7 64bit - 8GB of ram
Hello :)
8GB of ram installed in Windows 7 64 bit but only 6.94 are reported as usable...why is this?
Thank you in advance,
George
Windows Forum
Hello :)
8GB of ram installed in Windows 7 64 bit but only 6.94 are reported as usable...why is this?
Thank you in advance,
George
by dondefy
by the 'g-man.'
by videor
by the 'g-man.'
by dondefy
by videor
Ram brand: kingston at 800MHZ (4x2GB)
Graphics Card is not on board.
Motherboard Asus P5B
does mention a problem with 32 bit Windows systems will register less than 3 GB, so recommend a max of 3 GB RAM for a Win 32 bit OS. If the same problem applies to Win 64 bit systems then less than 3 GB plus 4 GB = less than 7 GB. I don't know if this is the cause, but seems logical.
I do know the short while I had 64 bit Win XP on my old Asus board it never registered the full 4 GB of RAM that I had in it - but that was years ago when MS first started with a 64 bit OS.
This would appear to be solely a Windows problem, you may wish to check the MS database on the issue.
by tmcgough
If you are running something like systeminfo in a dos shell, you will see 2 different memories:
Total Physical Memory: 8,095 MB
Available Physical Memory: 6,503 MB
This is how much memory is LEFT to be used, remember you are running the os and a ton of stuff in the background, the Available memory is how much memory is NOT being used at the time. To prove this just run systeminfo a couple more times and you will see the Available memory get less and less. Or what I like to run is the cpu usage gadget at addgadget.com that shows you how much memory is left and how much is being used. Also as some have also pointed out, if you are using shared memory for the video card that will take some away as well.
by rob125
My system is a Sony Vaio VGC-RC110G Pentium D 830 Dual core processer with a ATI Radeon X300 Graphics(already Updated through the Catalyst controller at amd.com). The computer has a 945P chipset (updated through intel.com. System has a Sigmatel High Definition Audio device (updated through sony's ftp. driver download site with the Sony Sigmatel IDT high definition audio codec.) While this has given me some sound, the sound is low because it seems to be coming from the system speakers. Bios clearly indicates EMT64 enablle, based on that information I Installed the 4 GB of ram and did a custom install, created the appropriate partions and I now have the best of both worlds WinXP (34 bit) on one drive and Win7 (64bit) on another drive. Both version are working fine. I no longer get the Memory limitation message that I used to get. I am able to open multiple windows on IE exporer 9 and run my antivirus scan without system lock. All I need now is to get that Mulimedia Video Controller working and improve my sound. Some of my research indicates some of the drivers may not be read because the system is only using the 3.5 GB of ram. I tried to resolve this problem by changing the values in the paging file. From the Current 3.5 to the Recommended 5373 MB. I did that for each drive since windows recomended the 5373 MB value as the recommedation for the total paging file, but this gave me a total paging file of 14328 MB.
My sytem seems to have speeded up, but it is still not reading the entire 4GB as usable amd hence not reading my Multimedia video. Controller and my sound is still low. Does anyone have a solution for the problem of reading the entire 4GB as usable? The 4GB are from Crucial.
Try reposting this in the 'Q&A' forum. The 'Discussion' forum is for matters of general discussion, not specific problems in search of a solution. The 'Water Cooler' is for non-technical discussions. You can submit a question to 'Q&A' here:
https://www.techrepublic.com/forum/questions/post?tag=mantle_skin;content
There are TR members who specifically seek out problems in need of a solution. Although there is some overlap between the forums, you'll find more of those members in 'Q&A' than in 'Discussions' or 'Water Cooler'.
Be sure to use the voting buttons to provide your feedback. Voting a '+' does not necessarily mean that a given response contained the complete solution to your problem, but that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours. If they have a ready source of reference available, perhaps won't need to repeat questions previously asked and answered. If a post did contain the solution to your problem, you can also close the question by marking the helpful post as "The Answer".
This discussion is closed to new replies.
Sort by Trending