Discussion Locked

Windows 95 Loses Sound

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 24 Windows 95 machines all with brand new Sound Blaster PCI16 cards. About 8 of the 24 machines have intermittent sound. I have installed the latest version of the drivers. Does anybody have any suggestions. It seems that in the AM all sound works great then as the day progresses we lose sound sometimes rebooting will bring the sound back sometimes it will not but after the computer sits all night sound always comes back - Strange!

7 replies

by gmarko9

eriki
Thanks for posting this.
At the moment I can not help.
But I would like to ask some questions.
Are all mobo's the same mfgr. Are sys's all in the
same room, area,or building.
Have you had sound cards in all machs. before.
thanks for your post agin.
greg

by eriki

Tryed to find something in common umong the few that are not working versus the rest that are working but nothing. All 24 computers are Hewlett Packard but several different models. All all located in the same room (classroom) and all are networked. Not all had sound cards installed before but all old sound cards have been replaced. Checked IRQs and found Sound Cards using their own IRQ so it was nit shared with any other hardware. Thanks Much!

by lumumba

I think this can help you try it. Go to control panel then system icon double click it after that go to device tab then remove 'sound game controller' and then power off your system then on after that reinstall (resetup) drivers from your manufacturer setup disk.
I hope this to help you.
lumumba.

by eriki

Thanks for your input but I have uninstalled and reisnatalled all with latest version of drivers with no success, I have noticed on a few machines that the Gameport has a conflict and reinstalling doesn't fix it so I have just disabled the portsbecause we do not need them.

by malibu81

Back To basics,

Power down the machines...
Pull the cards...
Clean the PCI/ISA slots with compressed air.
Check the slots and card for damage.
And Reseat the cards fully, make sure that when attachong holdown screw\plate that the card does not rise out of the mother\daughter board or riser.
Power Up
Recheck the BIOS settings due to fact that students as well as wanna be pros sometimes get a hold of passwords for BIOS or if you dont use administrative BIOS you should.
Check for coolingissues.
Check O/S settings
and disable APM in BIOS and in Windows

Heres the thought process... You said old machines new cards...
dust.... a possibility

You didnot mention your environment air conditioned?

Heating and cooling of internal components causes them to expand and contract causing
components to work there way out especially cards or accessory boards...

Wanna Be(s)
Dangerous Users People who think they know everything about a PC with no formal training, People in training, Playfull users what happens if I do this.

APM\Power management...
Sometimes when a machine goes into Power Saving Mode it cuts power to some devices..
They May not recover...

by eriki

You got it! It seemed the APM was the cause by disabling the APM in the BIOS and Windows it seems to have solved the problem. Thanks Again!

This discussion is closed to new replies.