This could be caused by several problems. You may have a virus. Have you installed any new Hardware or new programs, especially scanning, video, cameras?? Changed any hardware settings?
Since the system can't boot, I would try:
1) booting to dos either from the boot menu or the emergency start-up disk. Type scanreg /fix at the prompt and run that utility about 3 times first. VWIN32.vxd does not require a registry entry though so this may not fix anything, but it cannot hurt.
2)If thatdoesn't work, I would try scanreg /restore from the prompt and select a date (if there is one available) that the system was running OK. Use this especially if you have changed some system or hardware settings before getting this error. If you get system restore opperation failed, I wouldn't run it a second time.
3)If those two don't have any effect on the problem, Try extracting VWIN32.vxd. Path to the cabs means where the cabs are located, such as C:\windows\options\cabs or D:WIN98 or wherever they are. You should rename the file first in case you need to restore it.
At the prompt:
Type: ren C:\windows\system\VWIN32.vxd C:\windows\system\VWIN32.xxx
Type: extract /a (path to the cabs) VWIN32.vxd /l C:\windows\system
4)There is always the possibility that you will in the end have to Reinstall Windows.
If at any point you get it to boot windows run SFC from run to check for other system files that are damaged or corupted and restore the ones that it finds. If System File Checker finds several files that are corrupted it is very possible that you have a virus deep into the system.
Good Luck