Discussion Locked

Windows '98 OS on a CD

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been trying to create a Windows '98 SE
on a CD, but with no luck. This is what I've tried.

I formated a hard drive and installed Windows '98 SE on it. Then booted off a second drive. Then copied the first drive to a folder on the P.C. that had the CD-R. Then crested the CD.

I set the Bios to boot from the CDRom, but it would not boot from it.

It looked like all files copied. I know it's something that I did. But what?

Thanks for your help.
Frank Ecker
fecker@dmenet.com

7 replies

by parbo

Maybe a silly question but is the cd bootable?
I have been thinking about this for a while to try but never got to it. If this works remember that windows need virtual memory to work properly so you either need to reserve some space for that or point it to a HDD so it can write/delete that information. You also want to point your temp folder to a writable disk before making the cd. I usually use CD-RW to test first so in case something goes wrong.

by russ werner

Copying to the cd does not transfer the boot system files. Look at your CD software, there is a option to make the cd bootable. You put a bootable floppy in the a: and the CD software will transfer that to the cd before copying the files you select to be copied.

by rabbit_runner

Your coping of the files is okay. BUT...
1. You will need to make the CD bootable. When you create the cd, in your CD-RW program, there should be an option to make the cd bootable.
2. THe registry you created in the win98 SE install will have drive letters. When you try to run Windows 98 from the CD, The drive mappings in the registry MUST, I repeat, MUST be the same as when you installed it.
3. Most CD-RW's create a bootable cd by asking for a bootable floppy in the A Drive. Therefore you will be booting into your Windows 98 CD, like you would if you were booting from the floppy drive.

I have never tried it, but it should be possible.
REMEMBER: any time you try to run the cd, all drive mappings MUST be the same as when you did the install. Otherwise, it will not work.

This discussion is closed to new replies.