13 replies
by dmiles
by pgball
by vertex
by pgball
by lord ago 1
One thing to try is to get some of these programs that fix the registry. Fix meaning clean it out and find invalid entries of variuos types. I would suggest Norton Utilities and/or System Mechanic. Another "possibility" is that the hard drive might have physical damage and the registry file(s) are actually sitting on the damamged part. Check your hard drive for errors too.
Have Fun!!!
by pgball
by imrankasu
Run System File Checker and Scanreg
Run System File Checker
On your screen, locate and click the Start button. From the Start menu, point to Programs, Accessories, System Tools, and then click System Information.
In the Microsoft System Information window, click Tools, and then click System File Checker.
Run Scanreg
On your screen, locate and click the Start button. From the Start menu, click Shut Down. In the Shut Down Windows dialog box, click Shut Down the Computer, then click Yes.
After the computer has been shut down, turn on the computer and begin pressing the CTRL key in one-second intervals. If you perform this step correctly, the Windows 98 Startup menu appears. If Windows loads normally, restart the computer again, andthen press the CTRL key in one-second intervals until the Startup menu appears.
In the Startup Menu, use the arrow keys to select Command Prompt Only. Press the ENTER key.
At the command prompt, type: Scanreg. Press ENTER.
In the Check YourRegistry dialog box, press ENTER to begin the registry scan.
If a damaged registry is not detected, the Good Registry dialog box is displayed. If this is the case, try restoring a previous backup by following the procedure beginning in the next step. If a damaged registry is detected, it should have been fixed so the next steps are not necessary.
In the Good Registry dialog box, press the V key to view the available backups.
Select a previous backup, and then press ENTER.
Press the R key to restore the backup.
When the backup is restored, you are prompted to restart the computer. Press ENTER to restart.
by pgball
by eharris
ok.. Like before, Check your RAM Clean the contacts w/ A nice crisp dollar bill.. (Made of cotton and doesnt leave dust) make sure they are nice and clean if that dont work swap out the ram.. reseat the processor, start to remove variable.. like sound card modem etc.. make your system as bare as possible. you should then have a video card memory motherboard, keyboard, and mouse.. still get the error?? look below..
ok...
this will get rid of it because you are gonna load the original registry as if you reinstalled win98 or 95... so you will have to at least reinstall your drivers and programs.. no big deal as you wont have lost the actual documents..
boot up your computer if it says starting windows95 press your f8 key.. if itswin98.. then you gotta be quick and press it after the bios loads and before the win98 splash screen comes up..
ok.. the hard part is over.. you should get a win98/95 startup menu.. choose the option.. "Safe Mode Command Prompt Only"
you selected it and now your at C:\> rename your config.sys and autoexec.bat to config.123 and autoexec.123
back to the c:\>
type in cd (spacebar) windows
you should now be at C:\WINDOWS\> type this in.. attrib -h -r -s system.dat <--Then press enter you will just get a C:\WINDOWS\> Prompt.. what this did was unhid the system.dat file.. your registry. now.. lets rename that bad boy to this system.123
to do this type at the prompt C:\WINDOWS\>ren system.dat system.123
this was identical to renaming the autoexec.bat and config.sys file.. you should just get a blank prompt.
ok.. we renamed the autoexec.bat file.. the config.sys file.. and the c:\windows\system.dat file.. now we need to replace that registry file w/ the original registry file..
you should still be at the C:\WINDOWS\> prompt so.. type in cd (SPACEBAR) system...
you will be at this prompt C:\WINDOWS\SYSTEM\> there? good.. now type this..
by pgball
by pgball
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending