Discussion Locked

Windows 98 says cannot read drive A:

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello-
I'm having a small but annoying problem when I start up Windows 98. The computer is telling me that it cannot read from Drive A: like it thinks it's a network drive. If I put a floppy disk in and hit retry everything works fine. If I hit abort the message disappears, but I am left with a blank desktop and no other programs load. Any floppy disk I've put in let's the computer load. I've tried some different things I cleared out the documents and start up stuff from those foldersin the start menu. I'm confused because if the computer was looking for a particular program wouldn't I have to use the same floppy all the time? Any suggestions on this matter would be appreciated.

Thanks-
Matt Yeasky

7 replies

by dmiles

Not that it will look for that specific program,just tat it is looking for a floppy in the drive,first open device manager and make sure that it is working properly.
One you can type in msconfig at the run box and uncheck the box to delete it from start up.
Another thing you can do is uninstall the floppy and with the driver available,uninstall the floppy and reboot,the new hardware will detect and then you can reinstall the floppy,last but not least after so many reads the floppy will start behaving in this manner and the option would to replace it.

by myeasky

I tried what you said and I'm still getting same problem. The floppy drive works fine except for this. I tried uninstalling it and it still tries to read it on the reboot before it is detected as a new device.

by masked man

It's kind of a long shot but, run the SYSEDIT utility and do a search on "a:" there probably shouldn't be any, if there is that could be the problem. also double check the win.ini file that it loads and see if there's anything on the "load= or run=" lines. you can comment out those entries by placing a ";" at the begining of the line. There's more than one way to start programs when windows loads

hope this helps, I'll keep thinking if it doesn't.

gary

by myeasky

I checked those and couldn't find anything referencing the a: drive. The search for a: with the sysedit utility came up empty.

by mjchekal

Matt,
I have seen two things cause a problem like this. When the machines shutdown the A drive is active in the explorer runing a 16 bit application, or and much more troublesome. What Antivirus application are you currently running and is the defention file up to date. That is where I would check it sounds like the OS is trying to check for a device in the drive. either just to have it there or is trying to put something there.

Mike

by myeasky

Mike-
Thanks it was a 16 bit application called Adobe Type Manager. I uninstalled it and now everything is working normally.

This discussion is closed to new replies.