Discussion Locked

Windows 98 SE Boots up Slowly

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
After setting up a small peer-to-peer network at home, the one Win 98 SE machine takes forever to boot up. When it gets to the Windows 98 logo with the blue sky and clouds in the background, it sits there for about 2 full minutes. No hard drive lights, no noise. It's not actually hung either because it will continue on with the boot process and then boots up just fine. Is this normal? I have a Windows ME machine and Windows 2000 on the network and there is no effect on them. Thanks in advance.

11 replies

by leo.valmores

Two full minutes of waiting could be an eternity to usual PC user and maybe 'head to coffee room' for others!

Have you tried to run MSCONFIG.EXE on the machine? Check out which programs, drivers, dlls , etc. are being loaded during startup. You can even experiment with selective loading and see if results are OK.

Another contributor to delayed boot up is a very fragmented drive.

Hope this helps

by vilefileman

My small network has 2 W98 machines, and 2 W2000 machines. One of the Win98 boots to the login screen and automatically past it, so it can use the printer attached to the main 2000 box. Its basically registering itself on the 2000 box, and it takes a good 1-2 minutes on the "clouds" screen. The other 98 box , which uses the Microsoft family login, boots up much quicker.

V

by william jay

There are several procedures that take up time at startup: dhcp server and client, file and printer sharing and mapped drives, device installations. To make the first two things go faster: set the ip address(es) locally per machine and set the QuickLogon feature in the Properties of MS networking.

by adelhier

I would try to see if there is some software booting up in the background. To do this hit Esc key when you see the clouds and you will see all the programs your autoexec file is starting. In most cases it is the virus scan. Also the statement about the hard disk being fragmented is a good one. Try to defrag your hard disk and see if that helps.

If all ales fail do what I do. Ever 6 mouth I back up my data and format the hard disk and start from scratch. If you have fast Internet then you can update all your drivers. I suggest downloading all the drives and putting them on a CD-R. Then when you reinstall the OS all the drivers are on the disk. Also make note of your hardware setup.
This is a proven fact that after 6 + mouths you accumulate many unneeded DLLs and starting programs.

Good luck

Andy

by johngatopex

It sounds like it is trying to set up sharing with a drive or printer it can't find. Are you using IP addressing or just NETBUI ?
Try going to control.panel/network and turning off sharing on the SE machine, reboot and see if things get quicker. Itmay also be trying to reestablish a drive map that was renamed or moved. Also try configuring the default login to not reestablish network drive connections on login (rather select "quick login"). Once booted up, see if your network neighborhood iswhat you expect. Could be you might have a misspelled group name in the IP config.

This discussion is closed to new replies.