Discussion Locked

Windows 98 Upgrade; Modem won't work.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I recently upgraded a Windows 95 machine to Windows 98. Everything went well except that the modem is not working. I think the modem is called Win4Sound, but I'm not %100 sure.

On boot up I get a message about how an application needs a file that the system can't find. The file name is 'turbovhf.vxd'.

It says to press any key to continue. After doing so I get a similar message about file name 'turboVCD.vxd'.

After that the machine boots up ok. Except that the modem isn't working.
I'll replace the modem if it's a tough nut, but I was hoping someone had seen this before and knew how I might get in there and make it work.

3 replies

by dmiles

Virtual Communications Device driver that should be loaded from the modem disk if present,insert disk to install modem,by selecting to install by selecting from list and the drivers will load,if you donot have modem disk you will need to download drivers from the net.
The turbovhf device file may be on the WIN98 disk and needs to be extracted by following the add new hardware.

This discussion is closed to new replies.