Discussion Locked

windows 98 workstation won't connect to

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm setting up my first Windows 2000 server. This server is not connected to the internet. I setup the server as the domain controller and the DNS and Active directory seem to be working fine. I'm setting up a Windows 98 workstation to use DHCP. It won't connect to the windows 2000 domain but does get its IP from the windows 2000 server. I can run IPCONFIG /all and everything looks fine (as far as DNS stuff, ect.) the only thing it won't do is log into the Windows 2000 domain (Logging in as administrator and ensure the domain name is correct). Any clues

3 replies

by ian mclaws

Have you told the 98 system to log on to the domain? Simply typing in the domain name is not adequate for 2K. You must change both the "client for Microsoft networks" and the "identification" in network properties to point to your 2K domain. While you're there, make sure your primary logon is set to "client for Microsoft networks".
This will allow the 98 client to log on to the domain, but in order to have the 98 client use active directory, you'll have to install the active directory service client (found on the 2K server CD under support)

Good luck,

Ian

This discussion is closed to new replies.