Windows Forum

Ask something
Discussion Locked

Windows CE and NT 4.0 RAS Server

0 helpful
7 replies

by kent.burkhardt

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Windows CE Professional H/PC, and need to dial into a NT 4.0 RAS Server. The RAS requires password and data encryption, and as strong as possible. I have downloaded Microsoft's 128 bit SSL, but cannot log into the RAS server. I suspect CE does not support strong enough encryption. The server cannot be modified?

Any suggestions?

7 replies

by mike

this almost looks like a name resolution issue. I would make sure that you have wins set up on the computer that you are using to dial into the RAS server. When you look at your tcp/ip settings in networks look the wins tab and specify the IP address of the server on the machine. If the machine you are trying to access is a node on the network make sure that machine has wins installed pointing at the server aswell. Good luck.

This discussion is closed to new replies.