Discussion Locked

Windows ME - Answering incoming calls

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Resently I upgraded both of the windows systems on my home LAN to ME. I have o complaints but the fact that every time a call comes in the modem answers the phone. One thing that seems strange is that this hapens even while the log on the network screen is on. The fax services are turned off. I have not seen an postings about this isssue at this time. Is it an entry in the registry? Tech net has no mention of it that I can find.

3 replies

by jerrym mcse+i / a+

hi,
it sounds like your modem has been set to answer the phone with the settings being saved in the modems memory, to correct this, use hyperterminal to connect to the port that the modem is using (don't select the modem, connect directly to the port), at the screen, type AT then hit enter, the modem should reply with OK, if it does then proceed, if not, check the selected port,

type in ATS0=0 hit return (those are zeros')
the modem should reply with OK
type AT&W hit return
the modem should reply with OK
exit out of hyperterminal, shut down the comptuer, turn it back on and test...the modem shouldn't answer now unless you have a software package like answering machine, fax server..etc is overriding the factory settings...
Thank you for the Post! Jer

by fdisk

sory but it looks like it was a pre-relese of ME that was casueing it.

This discussion is closed to new replies.