Discussion Locked

Windows ME error

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am getting the following error when I start my windows ME machine:
"Spool32 has error in LXAEPPRT.dll. Spool32 will now close. If you continue to experience problems, try restarting your pc."
I have restarted and reinstalled the os to no improvement. Can anyone help me with this? Thanks!!

10 replies

by dmiles

Spool32 is a corrupt file or aborted printer setup
Ref the following Microsoft knowledgebase articles Q267288 and Q128345
Click Start,then RUN,type misconfig
Click selective startup on the General tab,then clear
Proces System.ini file
Process win.ini file
Load Static VxD's
Load Startup Group Items
Load Enviroment Varibles
click OK
Reinstall the printer driver after this process.
Now go to the Printers panel and right-click the printer,select Properties and click the Details tab,select the printer to print Raw

by seadogs

The printers folder does seem to have some issues. It is not displaying any printers. When I tried to run Misconfig as in answer #2, the file wasn't found. Can I get that from somewhere on the web? Is it specific to that system? Thanks!

by otl

The above are seem correct, should be a printer problem. LXAEPPRT Lexmark AE printer.

Try running setup in MS DOS Promt for the printer? (Fixed my Cannon on a Compaq) DOS and WINDOWS had to agree fo it to work.

by seadogs

Thanks everyone, it did appear to clear up with the printer removal. Unfortunately in the process I also wiped most of the hard drive - I rebooted and it wouldn't come back up. There were only 3 directories showing on C. So I reinstalled ME and it works fine now.

This discussion is closed to new replies.