Discussion Locked

Windows ME from 2G to 20G hard drive

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A client brought me a computer she installed Win ME on her 2 gig hard drive. She upgraded to a 20 gig and had the old hard drive copied to her new one. Win ME will not recognize the 20 gig. It still shows 2 gig. I have not worked extensively with ME and do not know what to do. Please help.

7 replies

by still_learning

You do not specify what system or processor you are working with, but it would seem that the BIOS is not recognizing the 20GB HDD. Have you gone into the BIOS and verified that the drive has been detected? Most newer HDDs come with an installation disk that both allows the BIOS to recognize the HDD and gives you use of the full drive. Hope this helps.

by dmiles

It is not the OS,but the type system that she has
What model and make of the computer is she using?
Check the bios version during the post and then confer with the manufacturers web site to see if their is a flash update to bios
The bios version will determine whether or not the large harge drive will be recognized
Once the flash update has been applied,the bios should not have a problem recognozing the larger hard drive.

by thechas

If her old hard drive had a bios interpreter, such as EasyDrive installed, it may have held it's settings when the old drive was copied over to it,

It is also possible that only 2GB of the drive was formated for the copy, and the rest is sitting there as unused empty space.

You should be able to check for both senarios using fdisk from a boot floppy. It should tell you if there is unallocated space on the drive.
Also, if fdisk says that there are no partitions, that is a good indicationof a bios interpreter program.

If either case is true, and you still have her old 2 GB drive, re-run fdisk with the mbr option (fdisk /mbr) This will get rid of the bios interpreter, and allow you to partition and format the drive properly. Thenyou can use Ghost, or another drive copy utility of your choice to copy the old drive onto the new drive.

This discussion is closed to new replies.