Discussion Locked

Windows Pro 2000

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok....I administer a Network with about 250 Workstations and 40 servers all running NT 4.0 , except a few member servers running W2K Server 2000 and about 10 workstations running WINDOWS PRO 2000 . Now here is my problem ...The W2K PRO boxes are having some type of DNS problem . Some times we can not hit a web site (mostly internal sites)or when you run User Manager it can not connect to the domain ..same problem with Exchange Admin and Server Manager , But if you close it out and try to open it agian 2 or 3 times ..It will open .The error is : "Unable to connect to domain " ( with USRMGR ) ...any way my PC as a static IP and all the others use DHCP .
We all use the same DNS , WINS and GW .

any Idea's ???

Thanks

6 replies

by rabbit_runner

I am not sure, but have you checked your HOSTS and LMHOSTS files? These can be causing some networking problems. If you have these files, rename them, and then re-boot.

This may or may not be a solution, but I offer it here, as something to check.

Best of luck

by netdrake

I don't know if this related or helpful, but I have trouble with a workstation running 2000 Pro that just "disconnects" from the domain randomly. When you try to access a network resource i.e. a mapped drive, I get a very similar message. But, allI have to do is go into My Computer and double click on the mapped drive, and I'm back on. I brought the issue up with Microsoft and they keep telling me it is a hardware compatibility issue.
You may want to check to make sure that the network cards that the 2000 machines are using are supported.

Again, hope this was at least something you could say, "Done that" to.

by pcapizzi

I have the same problem with my Win2000 PC's , with all diffrent nic cards .

Thanks for the support

by rabbit_runner

Here is another point, for what it is worth. Have you checked your Hub or Switch? Could be that there is some network traffic problem, which will cause the connection to drop. Also check you cable ends, connections points, cracked or cut cables.There could be some heavy network traffic that is causing collisions, which interferes with the normaly network traffic.

Perhaps you have already checked into these items. Let me know what you find.

by pcapizzi

Sorry ,but this problem is on all of my Desktops that run Win Pro 2000 ,and I don't think its a network problem or bad cables .

But thank you for your support

This discussion is closed to new replies.