Discussion Locked

Windows protection after upgrade to IE5

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After upgrading to IE5 and installed the 128 encryption bit, now when I reboot the win95 PC, it gets the windows protection fault.
I restarted it to safe mode and uninstall IE5 but it does't solve my problm.

I would not want to reinstall win95again as the user wants the data in the harddisk and I hv no way to connect to our network to transfer the data.
I'm in a fix now wondering what's next....

4 replies

by stevendun

Rather than uninstalling have you tried the Internet Explorer repair tool?
In Add/Remove Programmes double click Internet Explorer 5 and Internet Tools and select repair Internet Explorer.
Good luck!

by shanghai sam

It was the ethernet card that caused the problem. I remembered vaguely quite some time ago that I did an upgrade of IE on another win95 machine (AST bravo series), the same thing happened. My colleague later found out that network card was faulty. I'm not sure whether this PC model has some "disagreement" with higher IE version ..but anyway, now that I hv replaced with a spare card and it worked!!
Thks anyway!

by drew_lgca

Try to install IE again and see if it fixes your problem. But I think you are going to have to install a fresh copy of Windows. What you can do if you have a extra hard drive is remove the old drive and install the new drive. Install Windows and then install the old drive as a slave and remove all the data.

This discussion is closed to new replies.