Discussion Locked

Windows Shut Down

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having trouble shutting down my computer. OS is Windows ME and everytime I go to shut down it gives me this message:

Exception 06 has occured @ 0028:00000003 in VxD---. This was called from 0028:C002F285 in VxD---.

Any help would greatly be appreciated.

5 replies

by dmiles

A guess is that the error is caused by anti-virus software,Click Start-->Run,type in Msconfig in the box,uncheck the box next to your anti-virus software and reboot the computer to see if this will clear up the shutdown problem
Also check the Fast Find in Control Panel and disable it.

by albert franco ii

You don't say if any changes were made to the system before the problem began.
If any were made then try to undo them. If it was a new card or device then take it
out or put it back.

The above answer is also a possible culprit. But check these too:

Do you have a device (scanner, etc.) which you have unplugged from the computer.
Certain scanners and other devices can block the system if the device is not present at start up or shut down.

Try to remove the last program installed before the problem started.

Check for viruses and trojans that may be trying to do something at that moment.

Does the message mention a name for the VXD. This might give you a clue as to which device or program is failing. If you don't recognize the name post it here. There are tools which can tell you which vxd is operating at that address. You might try DiscoverPro from McAfee it's in their utility pak.

Good luck,
Al Franco, II
APF Creations
Pamplona, Spain

by nta001

Thank you, Deleted my HP Scanjet scanner & a four port USB hub. Working fine now.

This discussion is closed to new replies.