Discussion Locked

Windows Shut down

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently installed windows 2000 Pro on serveral PC's at my work. Some automatically shut down when ask to. But some say it is now safe to turn of your computer. I want my computer to automatically turn off. Help

11 replies

by rabbit_runner

Hi,
YOur problem is not with your operating system. It is doing what it is being asked.

Your difference is with your hardware. Some motherboards, have the feature to be completely shut off. Others need to be turned of manually.

Probably youwill need to upgrade the motherboard on the systems that say it is now safe to turn off your computer.

But check the BIOS on those system, sometimes you can upgrade the bios to accomplish what you desire, but do not count on that.

Best of luck

by gmscne

Some computers will not automatically turn off. You have to use the power switch to turn them off. It's better than letting the software do it.

by danpiers

There are two general types of power supplies in computers: the AT type and the newer ATX type. The AT power supplies have a true on/off power switch on the front panel that is directly connected to the power supply by a cable. These power supplies must be manually turned off by the operator. The ATX power supplies have two levels of operation: a sleep mode and a full-power mode. They do not have a power switch on the front panel. The front panel power switch is actually connected directly to he motherboard. When this momentary contact switch is pressed, it tells the motherboard to wake the power supply from its sleep mode, powering up the system. After Windows is shut down, a signal from the motherboard puts the ATX power supply back to sleep. Because there is always some power on an ATX system's motherboard, you should always disconnect the ATX power supply from the wall outlet before performing maintenance on the system.

by sfinnegan

If I understand you correctly the systems automaticly shutdown before 2k and don't now.
In some systems the advanced power managment gets disabled.
Go into the device manager, click view the show hidden devices. If the advanced power managment is disabled just re-enable it and your problem is solved. If that does not work you may want to check with the manufacturer of the motherboard to see if they have updated drivers for windows 2k.

by jhackett

You need to have ACPI enabled in the power management section of your BIOS. hope this helps.

This discussion is closed to new replies.