Question Locked

Windows xp hang up on welcom screen after successful installation.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I successfully reformat and newly installed Windows XP but it hang up on welcome screen. I am using a P4M800-M Motherboard, Pentium 4 CPU, 480MB RAM, and 20 GB harddisk. How can I fix the problem? Please help me.

7 replies

by robo_dev

Safe mode or Windows interactive startup might help to point out the problem

F5=Safe Mode
Shift+F8= Step-by-step confirmation

Try:
- resetting the BIOS to the factory defaults
- make sure motherboard BIOS version is latest and greatest
- re-seating the memory chips, and trying alternate memory in case you have bad RAM
- Run hard drive diagnostics and make sure 80 wire IDE cables are being used
- Swap video cards, and/or try using onboard video, if your motherboard has it.

by oh smeg

I would first be testing it with something like the Ultimate Boot CD to make sure that everything is working correctly before doing anything more. ECS has a reputation of being unreliable and as the Ultimate Boot CD is a free Boot Disc try it first before doing anything further.

http://www.ultimatebootcd.com/download.html

The things to test are the RAM, CPU, and Video as well as the HDD. ;)

Col

by kssandeep

Check some file missing during instalation time,find out in setup log

by rumseycw

I had the same problem and guest what I found. There was a bunch of dust in under and around my processor. The motherboards heat protection was causing my system to shutdown, not the XP OS.

I used a paint brush and an air can duster to clean out all the dust! Everything worked well after that.

This discussion is closed to new replies.