Question Locked

Windows XP Re-Intall from Dell OEM Disk

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I re-install or restore Windows XP on my Dell computer using the OEM disk that came with the computer, when Dell did not provide the Product Key? I used Innobate to learn the Product Code installed on the computer, but the Windows Installer says that code is not valid.

7 replies

by hal 9000

With the Product Key that you need on what M$ call a COA or Certificate of Authenticity and it not only has the Product Key but also the type of Windows that is installed.

Col

by mrmzng

This is the time to go out & get a new OEM disk with a new XP OS with the new product key. These disks have a time limit on them which forces you to get another one or call Microsoft to get the old product key activated if they decide it's a good version.
They will also decide whther it's too old or not, too.

by mib.2945

The disc doesn't have a "time limit" on it. However all dell oem os discs are machine specific. They will work on the exact machine they shipped with and no other machine, and will NOT require a product code. If this is in fact the machine the disc shipped with, has the motherboard ever been replaced? If so, the motherboard's service tag may not have been properly set. This tag is what the windows cd uses to generate its product key.

by sales

edited

In your case you need to ring Dell up as this is a Dell problem, because when Dell installed the Bulk OEM Product Key, your P.C. when it was new should have prompted you to input and register the Windows OS, and you would have to read the Certificate of Authencity (COA) lable on the side your computer housing (case), in some instances the the COA may even be inside the computer case (chassis).

Visit http://www.microsoft.com/resources/howtotell/en/coa.mspx to get a better idea on where the lable may be on your P.C.

On lap tops its on the underside of the case.

http://www.microsoft.com/resources/howtotell/en/coa.mspx

Message was edited by: beth.blakely@...

by sales

You may even need to call Dell support up, but before you do this, you may need your original set of CDs, such as the system restore CDs that came packed with the computer.

Then you need to explain to Dell that the computer never prompted you to enter in the Product Key Code on the side of the P.C. as it seems that it was a full imaged pre-install, i.e a ghosted image with the pre-registration all done.

Give them the alpha numeric codes on the inner ring of the CD.

Next you should be able to provide them with a serial number for your P.C. and Dell should now be able to give you a Product Key for that machine.

Dell should be able to match a serial number on your computer to a Windows XP license.

by bownjs

if you use a dell oem disk to reinstall windows, you don't need a product key. it won't ask you for one if you boot the computer from the cd instead of doing it through windows. dell doesn't have access to the product key for the computer

This discussion is closed to new replies.