Discussion Locked

Windows98 error codes

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I installed windows 98 on a new hard drive and after finishing the installation the sound and communications drivers were not installed for these devices. When I tried to install them the error message was device installed but windows encounted an error while trying to install the driver for this device. Error code 137

11 replies

by jolly roger

Hi:
I don't know what the error code means (nor does Microsoft, apparently). What sound and communications devices are you trying to install. Do you have the driver files for each of them? Try going into Device Manager and deleting (removing) thoseerrored items and click Refresh. WIN98 should re-detect them and ask for the drivers. Point Windows to the drivers and see what happens. Try doing them one at a time and reverse the order if it fails again. Does it always fail on the second device? If yes, then they are conflicting with one another, in which case I would look in the BIOS and see if Plug and Play OS is set to YES. This should get you started. If you need drivers, come back and tell us the device manufacturer and model. Good luck!

by jmatt

Maggie , here is your answer . John .
http://support.microsoft.com/support/Office/InProdHlp/Access/_error_137.asp
-----------------------
Here is the best way to get info from MS .

Go to http://www.google.com/advanced_search
Type search words in plain English in the "all of the words"
box and then:

1) Select "100 results" from the drop down menu (unless of
course you prefer to see less results at a time).
2) Select to return pages with results written in English.
3) Input to only return results from the site or domain
"microsoft.com".
4) Click on "Google Search."

by rick.philips9

It is also possible that these drivers are not fully compatable with W98. You may want to try and boot into safe mode and then reinstall the the sound driver. As for the comm driver, as long as it is not networking associated then safe mode should work also.
Rick

by deric_ykb1

i donno your sound and communications is onboard at motherboard, if not onboard, u try to plug out the either one of card, and try to intalling the driver, then u were know what is problem at there, if either one still have problem, u trying to change other PCI Slot to install it and also driver.

second problem, maybe u try copying the driver in harddisk, then using harddisk to install the driver.

before u do these, please delete the driver in device manager. so good luck.

by another computer guy

This is not so much an answer as a hint. Error Code 137 "The system tried to delete the substitution of a drive that is not substituted. " Sounds like you may need to check out your drives properties.

This discussion is closed to new replies.