Discussion Locked

Windows98 Protection Error

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How can I fix a system that will not boot with an error messsage of "xms driver not loaded" and "found unstable memory at address 00006xxxx" I checked Ram and harddrive; both work fine in another system.
Tried to reload windows and even formatted hardive and reloaded windows98. Can anyone help?

5 replies

by red dragoon

Concerning this system that worked fine, does it have exactly the same motherboard and hardware configuration?

If so, my initial thought is that the motherboard needs to be replaced. You might also want to try some new memory chips in the malfunctioning system.

Also, you may have to modify your config.sys file. First, you need to find where your himem.sys line is. It will look like
DEVICE=C:\DOS\HIMEM.SYS

Add this switch to the end of the line
/M:(code), where code is the code of your computer.

Good luck.

by guidos

Did you clear the BIOS? Sometimes just doing that will fix strange problems...I might be tempted to try another video card in the PC that's givng you the problems...hope this helps a little...

This discussion is closed to new replies.