Discussion Locked

WindowsXP SP2 IE maintenance policy prob

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Since applying SP2 to the machines on my school network, all machines are getting a userenv error with event id 1091 and description:

"The Group Policy client-side extension Internet Explorer Branding failed to log RSOP (Resultant Set of Policy) data. Please look for any errors reported earlier by that extension."

As a result the IE maintenance policies are not being applied (eg proxy settings).

I have been unable to find a resolution of this issue, apart from removing SP2, which works, but I obviously would prefer not to have to do that.

Thanks for any help.

10 replies

by rindi1

It could be the windows firewall which comes with sp2 that somehow interferes with your previous settings. Try turning of the firewall to find out if that is the reason, if so, you can change the settings of your firewall.

by bfilmfan

Review the Event Viewer for events logged by WMI and, if appropriate, the Group Policy client-side extension (CSE) that cannot log the RSoP data.
Verify that the WMI service (winmgmt) is running.
Click Start, click Run, type wbemtest.exe, and then click OK. Verify that you can access the root\rsop namespace on the affected computer.
At the command prompt, type gpupdate, and then look in Event Viewer to see whether the event that caused the error or another WMI-related event is logged again. If the problem still exists, stop and then re-start the Winmgmt service.
Use verbose logging to debug this error. The log file explains the specific error.

by johnstr

Thanks, but I had already tried this to no avail. I do however notice that although the WMI service is listed as automatic, and started in services, winmgmt.exe does not show as a process in task manager. Can this be a problem?

These suggestions do not seem to relate to the fact that the problem only appears with SP2.

by mdonato

If you are re-directing your Application Settings folder in Group Policy, try this as a fix..

Set the Application Settings folder to redirect back to the user profile folder when the policy is removed. Then set the Application Folder redirection to "Not Configured"

Then your Internet Explorer branding should work. It is a known problem with SP2 and MS is working on a fix. It apparently only occurs when the Application Settings folder for the user is re-directed.

by johnstr

Thanks, this sounded good, since it related specifically to SP2, and to folder redirection, which i did have enabled. However, removing this policy setting did not resolve the problem.

by michael.faulkner

Sorry, no answer as I have the same issue as of today when I finished installing SP2 on our workstations. But I'd like to know of any resolution if you find one. Thanks.

by mdonato

Maybe I didn't understand the problem....
*** Problem Description ***
After installing Windows XP SP2 Internet Explorer GPO Settings (Internet Explorer
Maintenance Policies) no longer apply correctly.

You may also see the following error message in the USERENV logs:

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1091
Date: 9/21/2004
Time: 1:03:09 PM
Description:
The Group Policy client-side extension Internet Explorer Branding failed to log
RSOP (Resultant Set of Policy) data. Please look for any errors reported earlier by
that extension.

This issue only occurs if the customer is redirecting folders and it?s been our
experience so far that even in the case of roaming profiles the issue does not
occur unless the customer is redirecting folders through Group Policy.

Specifically the setting that affects this is redirecting Application Data:

User Configuration\Windows Settings\Folder Redirection\Application Data

Redirection of the other system folders should not be causing this issue.

*** Resolution ***
A fix is currently being buddy tested.

Workaround:

1. Configure the Group Policy not to redirect Application Data.
**This will correct the issue on new user?s however old user?s will still see the
symptoms because this policy does not reverse itself when removed from GPO.

2. Configure the Group Policy to redirect to the local profile again:

User Configuration\Windows Settings\Folder Redirection\Application Data:
Setting: Basic - Redirect everyone?s folder to the same location
Target Folder Location: Redirect to the local userprofile location

This redirects Application Data back to where it was supposed to be. For some
reason we have not (yet) been able to fix this using the setting:
Policy Removal: Redirect the folder back to the local userprofile location when
policy is removed.

by johnstr

Yes, that was exactly the problem and the solution! I had not realised the need to redirect the profile as you suggest in point 2.
Many thanks.
-John

This discussion is closed to new replies.