Question Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Pc running winxp will not boot after trying to clear Administrator problem as suggested by Peco Jan 28th 2007.Now unable start in Safe mode,unable start via WinXP CD,and via Win98SE startup disk saying 'invalid drive specification'when chaging A: to C:.Help is urgently required .
5 replies
by charpis Accepted solution
Clarifications
by rdaugherty Accepted solution
Usually you can get into your BIOS with the F2 key during bootup. Once you get in, look for the boot sequence section and make sure your PC is set to boot from the CD drive first. This should allow you to boot from your XP CD.
by charpis Accepted solution
Thanks for your reply, problem solved
by borginva Accepted solution
v3.4
Overview
http://www.ultimatebootcd.com/
Download
http://www.ultimatebootcd.com/download.html
Scroll down to "Mirrors (UBCD Full)" and use either PlanetMirror.com or MajorGeeks.
I used it a few weeks ago and with all the tools it had, took time, but I used its burner to backup stuff, repair my drives, repair my partitions, and I was golden.
by charpis Accepted solution
Thanks to all, problem solved
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies