Discussion Locked

Wireless peer to peer network

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can anyone give me some hints on how to set up a wireless peer to peer network? I would like to wirelessly share resources on three computers.

7 replies

by fgarber

Go to www.sohoware.com. They feature the netblaster and wireless pcI and pcmcia network adapters. I use these products to connect 2 win2k laptops and an NT4 workstation. They run at 2 mbps but seem much faster. The windows setup after installation for the hardware is the same as any peer to peer setup.

by ebob

First: The peer-to-peer element wil be the same as with any other LAN (wired or wireless or hybrid, it does not matter). FWIW, I prefer to set all of my networks up running TCP/IP, exclusively. Unless there is a VERY good reason for doing otherwise.

Second: You'll need wireless NICs. They come with appropriate software, and antennae, and fit in either a PCI slot (for desktops) or PCMCIA slots (for laptops). You'll also need a wireless hub that matches the NICs. I would stick to the same brand/manufacturer for the NICs and Hub(s), despite the "promise of standards". With most of this gear, you can plug your wireless hub into a "wired" hub or switch to which you have connected your server(s), Internet connection, printer(s) etc.

Some wireless gear manufacturers include:
Intel, D-Link, LinkSys, 3Com, and Asante. Check out their websites for more detailed info.

This discussion is closed to new replies.