8 replies
by birdmantd Accepted solution
by spritebud Accepted solution
by birdmantd Accepted solution
by kees_b Accepted solution
If the mother board has power and the fans of the powered HDMI-cable (what's that and what fans does the cable have?) are on, it obviously is powered on.
What exactly do you mean with "won't power on" and "nothing happens"?
And a question: you say it worked at the old location and no longer works at the new location. Does it still work at the old location? If yes, there's something very special with the new location. If no, it seems it died during the move. Can happen. Find a repair shop then to fix it.
by spritebud Accepted solution
The cable has to fan, but when i plug in the attached usb (its a very long hdmi, i assume the UBS plug is for power), the cpu fan turns on. Very low, but certainly on.
And but "wont power on" i mean that when i press the power switch, nothing at all happens. no fans start, no beep from the boot, nothing at all happens. no screen output, no LED lighting (on the internal parts), nothing happens.
And i havent retested it at the old location yet. I plan to do so over the next few days and will update. I'm starting to think that being plugged into my smart TV may have something to do with it as the tv may tell the system that its there while my monitors may not. But i will move it back and test it. There is really no chance of it dying during the move as the move is only about 6 feet away. i always turn off the power supply when i move it so there is less change of a problem. but i will try moving it back.
by shepbob Accepted solution
I hve run into this when the cmos battery died.
Cheap repair for a $2.25 Battery
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending