Discussion Locked

Workstation NT and 98

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good morning,

I have a desktop running Windows 98 and a laptop running Windows NT. I have a 5 ports hub (Linksys) in between them. Those two machines cannot communicate with each other. I already check the Workgroup name (they are the same on both machine). If I add another laptop running Windows 95, the 95 and 98 can talk to each other without any problem. What else do I need to configure on the NT. Do I have to setup a domain on the NT?
Thanks

5 replies

by erebs

You don't mention what protocols you are using (IPX/SPX, TCPIP, etc) If using TCPIP, I have found that not assigning a name for the local Domain in the DNS settings can prohibit systems from seeing each other in network neighborhood.

But withoutinformation about your Network Properties configuration, it's all speculative.

by russ werner

I have a 12 computer peer to peer network comprising NT4.0 workstations, NT4.0 Server, Win98se and Win2000Pro. We do not have a domain, and are only using a workgroup. We have used Netbuei in the past and now are using tcp/ip. All computers see eachother and all can share each other.
Be sure you have valid ip numbers including subnet mask. Try 192.168.0.1 and 192.168.0.2 with a subnet mask of 255.255.255.0 or install netbuei which doesn't require an ip, only a computer name.
In neighborhood networks, right click and then properties. Be sure you are logging on to client for microsoft networks, enable file and printer sharing, and share something even if the a:
Hope this helps...

This discussion is closed to new replies.