Discussion Locked

workststion not responding

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running windows NT 4.0 on one server 33 workstation. Some workstations are not working.
Things I have done.
Green signal lights is on.
Ping the computer.
Check cable
However, when I try to tracert I get this message, "Unable to resovletarget system name." What is the problem?

7 replies

by mgonzales

You may not be running a form of Name Resolution. Make sure that you setup your server and a DHCP server to automatically issues IP address to the client machines. Also make sure that you have WINS running on the server and these properties are defined in the SCOPE options for DHCP (Scope option 44 and 46). One that is complete you should be able to ping by name.

Good Luck!

by rstodola

If you can ping the server by IP address, but not by the computer name you have a name resolution problem. You may need to enable WINS on the server.

by benjamin

If you don't plan on increasing your network anytime soon 33 workstation with only one server, sounds to me to be a solution to Netbui. I would otherwise not recomend it, but it sounds like over administration to setup DHCP, WINS, blah,blah.

I'd go with simply installing netbui protocol.

If you are increasing the size of your network, then go with the long term solution.

Hope it helps,

This discussion is closed to new replies.