Question Locked

XP Printer hangs

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm running the latest Windows XP and a HP Laserjet 3600 networked printer. I have a TCP/IP port set up for the printer and I print over the network using the latest printer driver. However, it takes ages to print - when I press print say in Notepad it can take up to five minutes. When I go to printer properties, it takes about 3 minutes for the properties window to come up. It doesn't seem to be the printer itself, as other computers in the office can print to it fine. Also, I can print to other printers no problem. It's just this combination of my computer and this printer. I've tried deleting the TCP/IP port and also reinstalling the latest (and only) driver available on the HP website. Still, anything to do with this printer hangs for ages. I've also tried pinging the printer (<1 ms) and traceroute tells me it's a direct connection.
Any ideas? Anyone? :) Thanks in advance.

6 replies

by reb00t

1. Do ipconfig/release & ipconfig/renew.
2. Stop/Start the Print Spooler Service.
3. Try PCL5 or PS driver instead of PCL6.
4. Replace the network cable going to PC.
5. Replace the network card in PC.

Try these in the steps above.

by sgt_shultz

anything in your event logs or on the device hosting the printer?
it does sound like a wiring/nic issue...but what kind of network exactly are you on please?

by sscrivener

I'm on a 10/100 Ethernet network. All PCs and printers are connected to a switch. All PCs have the same pritner configuration (i.e. they all have identical "local" TCP/IP ports to the printer.

Thanks.

by ic-it

Print out a configuration page and verify the duplex settings and/or the auto-negotiate.
Compare that to your network settings.

by sscrivener

Thank you very much for your replies. I will try everything suggested and let you know.

This discussion is closed to new replies.