16 replies
by dustyd
Are you actually sharing the host's internet connection? Or just using its connectivity?
Do you have the network connections bridged? How are you connecting the 'other computers'? Through hub, switch, router?
You say DHCP is used for the ISP NIC? Are the other computers assigned good IP's and subnet to match the LAN NIC?
If you have tried using the Network Connection Wizard have you picked the correct connection to internet and lan; just try making sure all settings are correct without it.
by douglasb
Poster rated this answer.
by statykserver
Here are two useful articles to help you out.
http://www.practicallynetworked.com/sharing/xp_ics/
http://www.microsoft.com/windowsxp/using/networking/learnmore/ics.mspx
Once the nic that is attached to lan (other pcs) has the ip address make sure the others have the same range so they can see each other.
by douglasb
Poster rated this answer.
by diskaus
I am actually runniing a similar setup to what you are describing, if you have not done so already open network connections, locate your internet connection and right click and select properties, click on the advanced tab and check the box "Allow other network users to connect through this computer's internet connection"
The second box " Allow other network users to control or disable the shared internet connection" is optional.
Also make sure when you setup the network using the wizzard ensure that the other PCs are configured to connect to the internet through the host PC " This computer connects to the internet through a residential gateway or through any other computer on my network"
depending on the specs of the other PCs it may take a few minutes for the other PCs to connect to the Internet.
Hope that helps
by douglasb
Poster rated this answer.
by douglasb
by jstafs
by douglasb
Poster rated this answer.
by douglasb
by douglasb
by addison
1.Open Internet Explorer
2.On the Tools menu, click Internet Options.
3.On the Connections tab, click Never dial a connection, and then click LAN Settings.
4.In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
5.In Proxy Server, clear the Use a proxy server check box.
by douglasb
Poster rated this answer.
by addison
It's best to start form scratch:
To enable Internet Connection Sharing on a network connection
1. Open Network Connections
2. Click the dial-up, local area network, PPPoE, or VPN connection you want to share, and then, under Network Tasks, click Change settings of this connection.
3. On the Advanced tab, select the Allow other network users to connect through this computer's Internet connection check box.
4. If you want this connection to dial automatically when another computer on your home or small office network attempts to access external resources, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box.
5. If you want other network users to enable or disable the shared Internet connection, select the Allow other network users to control or disable the shared Internet connection check box.
6. Under Internet Connection Sharing, in Home networking connection, select any adapter that connects the computer sharing its Internet connection to the other computers on your network.
by douglasb
Poster rated this answer.
by douglasb
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending