17 replies
by gregg.rodgers Accepted solution
by hal 9000 Accepted solution
If it's very badly remove the HDD fit it to USB Caddy and then attach it to another computer and save the data. If the User has made the files Private you'll need to take ownership of the files by following the directions here
If they have used the Encrypted File System you'll need to save the Encryption Key by following the directions here
You can perform an In Place Install by following the directions here but if EFS has been used you'll loose the Encryption Key and all the data will be gibberish so you need to save it first on a different computer via a USB Caddy
As time is money and you need to work fast I would suggest saving the data wiping the drive with a utility like Boot & Nuke which writes zeros to every sector of the HDD and the rebuild the Software package from there Honestly it's faster and less strain on yourself once you have the data saved.
But if you like you can try the above methods of recovering that Windows Install or you may like to try this Recovering from a Corrupted Registery
The PCI device is one of the On Board components which is giving the problems so that's why you are unable to find the problem and it may very well prove useful to run some diagnostics on the computer while you are recovering the DATA on another machine so you could boot off The Ultimate Boot CD and run some M'Board Diagnostic while the data is being saved elsewhere
Col
by gregg.rodgers Accepted solution
by sue t Accepted solution
Did you try booting to Knoppix or one like it. You might be able to save the data and then even replace the file it wants. I have also used Data Rescue PC from prosofteng.com several times and it has never failed to get the data even when I got the not formatted message while trying other ways to save data.
Good Luck.
by hal 9000 Accepted solution
The answers are all second nature by now and I have the M$ Knowledge Base Sites Bookmarked to save searching for them.
The reason that I asked How important was it to recover the Data was If there was a current Backup available it would have been easy to blow away the Windows Install and reload. But if you tried to do a Repair Install and there where Encrypted Files it would have blown away the Encryption Keys which are slightly important to most people who want to keep their data.
The Drive stopping another computer from Booting is something that I've seen quite often and I've always got around it with a USB Caddy but in this case as there is nothing on the drive that is readable and you've already started a Partition Recovery Program stick with it. Though Personally I would have suggested On Tracks Easy Recovery as it rebuilds Partitions quite quickly and I've never had a problem with it but it's not cheap. Some people think that when they pay over 1K for a program that it should take more than 5 minutes to rebuild the partition but I like the way that it works and how easy it is to use.
Lets know how you get on and if you have any more trouble.
Cheers
Col
by ronan.young Accepted solution
Just thought you might be able to copy the file over from the command prompt, when the drive is hooked up as a slave.
Or you could try copying the information/data you need off the troubled HDD from the command prompt onto the primary!!!
just a suggestion
by albertyn Accepted solution
by tobif Accepted solution
It's easy.
Click on "Ask a question" and give all relevant information. (Copy your question from here, but add a little information about your computer and system.
And, yes, it seems like hardware related. But that may show if you try to do the following.
Do you have backups of your data? Could be time for a wipe & low level format & reinstall.
by gregg.rodgers Accepted solution
I greatly appreciate everyone's help with this so far. This is the first time I've ever sought help via TechRepublic or even the internet on a problem. As it stands today, I'm 24 hours into running SpinRite 6 and it is showing me that nothing has been recovered. It also tells me that it has 2,257 hours left to "fix/recover" the drive. I have a feeling that SpinRite won't help me much. Unfortunately, there is no such backup of this data, and believe me that this person has learned her lesson! Should I seek professional help with this drive, i.e sending it away to a recovery company, or should I try OnTrack's Easy Recovery software? Or should I try the USB Caddy idea first? Thanks again!
-Gregg
by hal 9000 Accepted solution
I bung the drive into a USB Caddy and then run On Tracks Easy Recovery but I don't know if that will work after a different product has been attempted. the spiel for On Track is posted here
But it may be worth a phone call to a couple of Data Recovery Houses to see if they can recover the data after what you've done without resorting to Forensic Recovery Methods which involve stripping the HDD and coating the platters with some green goo and then reading every layer of data ever written to the platters.
That's very expensive and always the last alternative.
Col
by gregg.rodgers Accepted solution
Col,
Can you direct me to a place where I can buy a USB Caddy? The hard drive I need to recover is a Maxtor DiamondMax Plus 8 40GB drive.
Thanks for your help!
-Gregg
by hal 9000 Accepted solution
Desktop units have 3.5 Inch HDD and Note Books have 2.5 Inch Drives. So depending on the type of computer you now which type of USB Enclosure to buy.
I live in AU and by the looks of things you live in Canada so you can buy one from ME! :D
But I'm sure that there are some places that will have these in Canada that can ship them out to you if you are away from a major Metropolitan Area or a shop close to you if you are in one of the Metropolitan areas.
If you want a cheap 2.5 inch USB Enclosure E-Bay has several places that sell these for less that $10.00 AU but the Postage is a killer and the time taken to come up with them can be quite a long while as well.
But as an example locally the 2.5 inch ones retail for around the $28.00 AU which is around the $25.7971 CD mark for the 2.5 inch enclosures and $39.00 AU or $35.9470 CAD but these have their own Power Pack which runs off the mains to provide power for the HDD. That is about the starting point and they can work up from there but not overly much more unless you look at one of the ones with built in lights that flash and so forth but do nothing else.
When I use these enclosures I always set the drives to Master and allow the USB Hub to sort out the preferences that are allocated to the USB Drives I've had up to 8 at a single time connected to a computer so they do work quite well.
Col
by gregg.rodgers Accepted solution
Col,
Thanks for the reply, but let's clear one thing up.
I'm a red blooded American! (or Yankee), but that would be a little insulting since I was born in Virginia (home of the confederate capital!)
Anyway... I digress.... I purchased a CP Technologies Platinum Series 3.5" Caddy, and the RecoverSoft DataRescue PC software. I ran the trial version of DataRescue PC and it seems that this is the only software that sees the files on this godforesaken drive! So when I receive my registration key I will be able to recover the data!!!! :) Lets cross our fingers! I'll post another thread if in fact it does work. More to come!
Thanks!
Gregg
Winchester, VA USA
by will Accepted solution
Hello, I saw the head line and thought some on may be
able to offer some advice. I have been trying to load server
2003 on my computer for about 2 weeks. Every time I try
it stops at the windows setup screen before the recovery
and continue screen is. I have read a number of forums
and have been all across the net trying to find the
answers.
I would have thought it was the disc but I took it to uni
the other day and tried it on computers there and it got to
the recovery screen.
I had one error that said I have a problem with a system32
\ntoskrnl.exe file???
If any one has any ideas I would be much appreciative.
Cheers Will
by kevin jj Accepted solution
by tholhitz Accepted solution
by tobif Accepted solution
You just bumped a question that was discussed 3.5 years ago.
I wouldn't expect anyone to get back to discussion and "find out something".
So you better post a new question.
You will get better answers, if you give a bit more information about your problem (not only "computer doesn't start".)
What computer?
What system?
Did you do anything particular before this happened?
Any sounds, beeps, signal lamps?
What have you tried so far?
What happened?
etc.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending