8 replies
by julian98 Accepted solution
by Wizard57M-TR Accepted solution
support.microsoft.com/kb/195988
modemhelp.org/inits/usrobotics.html
www.usr.com/support/overview-template.asp?prod=s-cour
by charles bundy Accepted solution
What is the model of these 3Com courier modems? If they are connected by a twisted pair it sounds like a short haul setup, which would probably be configured by dip switch :). Or you could be using these in leased/sync mode in which case I found this -
http://facility.unavco.org/kb/getattachment.php?data=MTA4fFVTUl9tb2RlbV9tYW51YWwucGRm
This brings us to what is it you are trying to communicate with, the modems or the security panel at the end of the connection?
by julian98 Accepted solution
by robo_dev Accepted solution
What software is being used on the PC?
Are these DSL modems or analog modems? (what model)
Was this working before, or is this a new install?
Just curious, what sort of distance? (sometimes modems are not needed)
by julian98 Accepted solution
by charles bundy Accepted solution
It should do the trick. These were put in as a short haul solution and are treating that 300 feet of cable as a dedicated line from the telco (except in this case you own the cable :)).
Hope this helps!
by charles bundy Accepted solution
Assuming your security PC is running MS-Windows (for the virtual COM driver) and there is a drop near the security controller this should work -
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending