Question Locked

App to turn PC into a Cable Tester?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to find an app that I can use to turn my laptop into a cable tester (Think Fluke). Of course, I would not expect full functionality... but what would be especially helpful would be the capability to flash a port on a switch in order to track down wayward cable drops.

Thanks for any suggestions!

5 replies

by mjd420nova

I've worked with many custom built PC based test equipment and the USB ports provide an excellent way to test them but a custom interface board and maybe even some relay sequencing circuits would provide what you need. I've done this with IEEE-488 cables but it takes alot of work prototyping. Care must be taken with the USB ports to protect them from unforeseen faults that could short the port and blow the chips right off the motherboard. Maybe even a low end system (80286) and a plug in port card but unless you have a junk box of spare obsolete stuff it would be a tough build.

by cowen80194

5000 for a tester is cheap compaired to the work you are going to need to put into that.

And a tester can be certified that contraption would not be.

DSP4300

by jeh_it

I've looked for somethink like what you are discribing on the retail market and have never found it. I would like to see what you have developed. To avoid damage to the computer, you would want to have a fuse built into the device like a regular multimeter would. And, of course, I would have my computer backed up before I start.

This discussion is closed to new replies.