Discussion Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running NTBackup on and NT 4.0 server. It is setup to run from a batch file automatically using the AT command. The problem I am having is that the backup job will run OK for a number of days. Usually about 3 or 4. Then on about the 5th day, the backup job seems to hang. I will come back to check the logs and all I can see is that the backup job hung during the verification phase. When I run Task Manager & try to terminate the backup job, nothing happens. The only solution I have found is to reboot the server. Other than buying a different backup program, and solutions?
3 replies
by karpi
Hello,
to shut down the backup-job you have to kill the batch. Look for a CMD Process and kill this process. To solve the hanging, enable a more detailed log with the processed file. Maybe the file is locked by another process.
HTH
Karpi
by dvsnnr
Do you have an older tape unit? If it is an older IDE-ATAPI tape unit (which is connected to the same channel as a CD-ROM unit) and you open/close the CD-ROM during the verification process, you may get an error. (Q263480)
If so, this 'MAY' cause the server to hang. (I know that's a lot if 'ifs'.)
by mikeanselmi
I suffer from the same problem. If you check your logs you'll probably see a "bad block" entry in your application log for ntbackup. Replace the tape. Insert cleaning tape. Voila. It should run fine for a time. If you try terminating the ntbackup process you'll recieve an "access denied message" only way to get ntbackup to run after this fiasco is a reboot.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
17 replies
0 helpful
5 replies
0 helpful
12 replies
Discussion
Do you think that business directories are relevant to Local SEO And Lead Generation today
0 helpful
14 replies
0 helpful
2 replies