Discussion Locked

Boot disk won't recognize CDROM

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I made a boot disk through the control panel on a 98SE
machine. It has a Matshita CDROM CR563 with an MKE
Panasonic CDROM controller.
When I boot off the floppy, the process hangs at finding the
CD and comes back with 'No drives found, aborting
installation'.
If I boot into windows, the Cd works fine.

10 replies

by oz_media

The Windows startup disk only has a generic CDROM driver. In your case, you seem to be using a SCSI CDROM controller, right? The PCI card is not installed by the diskette.

On the Win98 install CD, in the tools folder, there is a FAT32EBD utility which will create a floppy with SCSI support for you. You just
run the program and have a diskette ready.

Now, if you can't boot to Windows or use a CDROM, this doesn't help much at all does it? BUT...
You can create this bootdisk by inserting your Win98Disk into any PC. It won't have ANY effect on th eother system. If you have anothe IDE CDROM, you can use it to install and craete your boot disk.

by sgt_shultz

sorry OzMedia. can't agree that scsi is the problem. it is probably that panasonic controller. those ASPI drivers are the win98 startup disk are for SCSI support. think this person just doesn't have the right DOS driver for that CD/controller. i googled it (matshita CR563) and found some drivers i'd try at this url:
http://www.drivermuseum.com/files/drivers/cdrom_d.html
remove any space that crept in to the url etc etc

by oz_media

"When I boot off the floppy, the process hangs at finding the CD and comes back with 'No drives found, aborting
installation'.
If I boot into windows, the Cd works fine. "

Would this not indicate an problem with the generic Win98 boot disk? It doesn't have a SCSI driver for the card and cannot see an IDE device.
That is why the Win98 CD domes with the FAT32EDB cab files isn't it?

That's how I resolved the same problem with a Sony SCSI drive.

by oz_media

My apologies ! In your post you stated,
"Panasonic CDROM controller." This lead me to believe that you had a PCI card controller for a SCSI drive.
Wrong assumption I suppose, sorry bout that!

Om

by mopdyke

I'm not a PC expert, so sorry about the confusion. Now i have the
driver as recommended by sgt_schultz, but I'm trying to get it to work
on my boot disk.

by mark

The MKE panasonic driver is not scsi, but it is proprietary. I have the drivers on my FTP site, but why be so cheap. That is an old obsolete piece of junk drive. Go find a decent IDE drive for about $25. I have a dozen or so used ones I'm selling for $5 each. Come on, don't live in the dark ages. Your time has got to be worth more than this headache of making that drive work.

This discussion is closed to new replies.