9 replies
by clubmac
Have you recently changed any hardware like your motherboard? If you have, this has been experienced by many users who swap hard ware with XP. The best way to bypass this is to go into the bios of the board, hold del. button on startup, and go tothe menu that says load setup defaults, and save them. Then reboot and use the F8 key to enter your OS in safemode, let the system find the new hardware and problem should fix itself. If this is not the case, then you could have a driver mismatchproblem. Another problem maybe that the boot directory path may not be right. i.e window instead of windows if this is the case use the cd to boot and then use run command on the start menu to run msconfig. In the config flip to the boot.ini taband check boot path.
If after trying these it still is not fixed, i'm sorry but I can't tell you more without seeing it myself.
by pdi_it
by tqp050774vp
by pdi_it
by thechas
Make sure in BIOS settings that your hard drive is listed as a boot device.
XP 'normally' sets up the hard drive as a boot device all by itself.
You may need to run the recovery console from the CD, and use the system command to make the drivebootable.
Chas
by pdi_it
by compserv
by pdi_it
by pdi_it
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending